The Emerald Planet (EP-HW-240-Li10) Photoelectric Smoke Alarm is powered by a 240V mains power and supported by a 10YR Lithium battery back-up.
This alarm can be stand-alone or can be connected (hardwired) with up to 12 alarms on one circuit. This allows all smoke alarms on the circuit to activate simultaneously.
The alarm is fitted with a test/hush/silence button to facilitate testing of the alarm. The silence function allows the alarm/system to be silenced in the case of a false alarm. Silencing one alarm will silence all connected alarms.
Designed to meet the rigorous new Australian smoke alarm standards (AS3786: 2014).
Normal Operating & Storage Temperature
0oC to 40oC
125mm diameter, 40mm deep
240V, with 10yr 9V Lithium battery back-up
Photoelectric optical chamber
>85dB(A) at 3m
Hardwire interconnection. Up to 12 units per circuit
Active: Small red flash every 40 secs
Alarm: Rapid red flash with alarm
Normal Operating & Storage Humidity
15% to 95% relative humidity (non condensing)
Screws, mounting plate and interconnection wires
RF capability in enabled via the RF base (additional accessory), enabling connection with up to 40 alarms on one wireless network.
The Emerald Planet EP Base is an additional accessory to standard 240V smoke alarms. Installation is made easy with large terminals and a wide (140mm) base that allows for imperfect ceilings and coverage. After installing the base, the 240V smoke alarms is simply plugged directly into the base to function. It can then be easily removed for maintenance.